Chromoly Straight-Cut Cam Gears (3-Bolt), Adjustable
£125.40inc 20% VAT
OE Code: 1339
Want to be notified when this product is back in stock?
Description
Straight Cut Cam Gears remove the thrust load off the camshaft bearings, which is a problem with dual springs, and especially with high lift camshafts. These require less HP to drive than stock (helical) gears. Supplied with bolts and indexed washers to adjust in 1 degree increments!
Construction from Billet 4340 Chromoly Steel
Always check the following during installation:
Sometimes the woodruff key is too wide, or the slot in the crank is too narrow. This causes the crank to “swell” when the key is hammered into the crank, then the gear is too tight next to the gear. This is a common cause of the gear cracking at the key way, or the more common not known problem of elliptical crank gears, which shows as the cam gear has serious tooth wear in 2 locations 180 degrees from one another on the soft aluminum gear. Make absolutely sure that the crankshaft does not measure larger on either side next to the woodruff key after the key is installed.
Details:
Style: Straight Cut Gears
Material: Billet 4340 Chromoly Steel
OE Reference: 1339
SKU: 010070002
Information
Shipping
We currently offer free shipping worldwide on all orders over $100.
Sizing
Fits true to size. Do you need size advice?
Return & exchange
If you are not satisfied with your purchase you can return it to us within 14 days for an exchange or refund. More info.
Assistance
Contact us on (+44) 555 88 65, or email us at support@reytheme.com.
Specifications
| OE Code | 1339 |
|---|